There are many variations of these springs out there. We have used the 2 Leaf pack version and gained 2.5" of lift which eliminated the factory block. The truck sat level with a 2" Front Shackle Reversal. When using the 3 or 4 leaf packs you will potentially gain more lift than the advertised 2.5".
You need the whole kit to complete the swap and keep the correct suspension geometry. We only made this an option for those that already have the 2" shackle flip and/or boomerang shackle.
Ebrake bracket is intended to be weld on to your specific application, we have came across variances in location that does not allow us to place the bracket for you. Hangers have 2 pilot holes in case you want to drill larger holes and run bolts in a location you choose. Powdercoated kits will require drilling and tapping to locate ebrake bracket.
If you have a standard cab truck you will have to slide the front tank over to be able to get behind the frame to drill the necessary holes and install bracket. We installed this kit on a single cab truck, it is possible without removing fluid lines off of the inside of the frame.