Will require removing the spacers inside the hanger on our shackle reversals .Box kit may have an extra hole depending on which kit you are using.
If using a 5" shackle reversal the forward most top hole is not used.
1. Drill a 5/8ths hole on outside of the frame using the supplied template lining up the frame slots for reference. 2. Insert 5/8ths bolt through frame and box plate. Plate will generally square itself measure to verify. 3. Next tack weld in position and drill the remaining three 1/2" holes in the bracket through the frame. Now is a good time to hang the reversal and double check the box plate kit is in the correct location. Finish weld, we find its best to stitch 2.5" sections. 220 or larger .035 wire machine is recommended. 4. You now effectively have a 4wd frame horn in which to hang any of Sky's reversal hangers.