Dana 60 King Pin Springless Design High Steer Arms and Install Kits
This kit includes two arms and two install kits.
Sky's off Road Design Dana 60 King Pin Springless Design High Steer Arms.
Compare our King Pin Dana 60 arms to others on the market, and you will see their value and features don't compare!
Arms include the pre load adjuster and shim for the top of the king pin bushing. Arms have been machined to sit flat with the axle on the tie rod and drag link holes to relieve joint bind.
We have designed these arms with Ackerman angle, for a turning radius decrease of up to 22 percent! Yes a decrease in the overall circle your vehicle will need to turn in order to clear tight obstacles!
One of the only Dana 60 arms on the market that will help you turn tighter! We have also designed the arms to fit under Toyota trucks with full turning radius, basically the tie rod and drag link dimensions match our Toyota steering arms now! What be thy dimension you ask? King pin center to tie rod eye 4.250 and 6.625 for the drag link.
These arms also work great on Chevy/Ford/Dodge crossover steering kits as our pit man arm match's the 6.625 drag link eye length.
Arms are available in left and right hand, with single hole driver, and double hole passenger side, machined for 1 ton 7/8thsx18tpi GM taper tie rod ends.
Arms can be machined for 3/4 bore hiem joint special order, or have local shop perform the mod.
The arms are designed for use with conical nuts and special longer studs provided by Sky's ($25 Per Arm!).
The 5 stud design match's Reid Racing steering knuckles.
Arms fit Chevy/Dodge/Ford Dana 60 King pin open knuckle axles.
Steering Arm Info:
Our steering arms are CNC machined out of ASTM A572 Grade 50 steel. We previously have used 1018 steel, but switched to a more rigid material (A572). Grade 50 is a very strong low allow steel that fulfills our exceptionally high strength requirements, and is particularly strong for applications in which it is riveted or bolted. ASTM A572 Grade 50 is considered a "workhorse" grade and is widely used in many applications. Steel mills produce channel and heavy beams with Grade 50. It is commonly used in structural applications, heavy construction equipment, building structures, heavy duty anchoring systems, boom sections, structural steel shapes, and applications that require high strength per weight ratio.
*Tensile strength: 65,000 psi
*Yield strength: 50,000 psi