Chilkat Designs' E-Racer Cable Conversion. The E-Racer replaces the OEM electric actuator.

Chilkat Designs' E-Racer Cable Conversion

The E-Racer replaces the OEM electric actuator.

The E-Racer is designed to work with both the
high pinion FJ and low pinion Tacoma 8"
E-locker differentials.

If you already have an E-locker 3rd member (chunk),
the E-Racer is a simple bolt on upgrade that can be
done with basic hand tools anywhere, anytime.

And yes, it is compatible with front leaf springs!

* No wiring
* No fluids to replace
* Re-use the factory E-locker spur gear
* Engage your locker in 2WD and 4WD high range
* Stainless steel to withstand the elements
* Anodized aluminum to preserve the look
* The main shaft, which will take most of the torsion load, is made
from heat treated, stress relieved, ground and polished 4140
Acralloy steel.
* Double o-ring design seals the fluid in and contaminants out

For custom builds, extra material is left on the E-Racer's circular lever.

Chilkat E-Racer
Full Kit Includes:
1 - 3rd Member Actuator
1 - Cable (8', 10' or 12')
Stainless Steel Cable Ends
1 - Hand Shifter
All Stainless Mounting Hardware
20- Zip Ties
Spare O-Ring, E-Clip, and Key Stock

Tips for finding your cable length:

Route an air hose or garden hose from the hand shifter locating (in cab) to the center of the electric actuator on the differential.
Make sure when routing the mock up cable/hose to not make bend/corners tighter than 6" CLR (center line radius).
Choose a path away from abrasive/sharp surfaces and heat.

The E-Racer is homegrown and locally made in the U.S.A.
These kits are simple, complete, and designed to give you
a reliable selectable locker that is all Toyota. The E-Racer
provides unmatched sustainability that every
4x4 expedition vehicle needs.